stunnel-users

stunnel-users@stunnel.org

6 participants
3294 discussions

socks4 support
by Michal Trojnara 15 Nov '14

15 Nov '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, Please take a look at the latest stunnel-5.08b4 available for download on https://www.stunnel.org/downloads.html It adds support for SOCKS4 and SOCKS4a protocols. The SOCKS protocol itself is encapsulated within SSL/TLS encryption layer to protect the final destination address. http://www.openssh.com/txt/socks4.protocol http://www.openssh.com/txt/socks4a.protocol The BIND command of the SOCKS protocol is not supported. The USERID parameter is ignored. To setup SOCKS4 VPN configure the following client service: [socks_client] client = yes accept = 127.0.0.1:1080 connect = vpn_server:9080 verify = 4 CAfile = stunnel.pem The corresponding configuration on the vpn_server host: [socks_server] protocol = socks accept = 9080 cert = stunnel.pem key = stunnel.key Now test your configuration on the client machine with: curl --socks4a localhost http://www.example.com/ Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlRmVXgACgkQ/NU+nXTHMtHuZwCfXlH0YYTHYhThoXPrCgV4OhrE BwsAoLgIpVWDOdBbISzrP53m2H9LUR6W =9DEh -----END PGP SIGNATURE-----

1 1

External validation of client certificates
by Rene Bartsch 15 Nov '14

15 Nov '14

Hi, we're having a special use case and hope to find a solution in stunnel. In our use case clients use self-signed X.509 certificates to authenticate with our TLS-server. We don't have a CA but a database with usernames (DN) and fingerprints of the client-certificates. Is it possible with stunnel not to validate the client certificates against a CA but handover the Distinguished Name to an external application which returns the fingerprint to check the certificate against? -- Best regards, Rene Bartsch, B. Sc. Informatics Current Bitcoin Exchange Rate: https://www.bitcoin.de/de/r/mwfngu

2 1

How to enable weak ciphers in stunnel
by Swonk, Glenn 15 Nov '14

15 Nov '14

When I run stunnel, I would like to enable the weaker ciphers and protocols (SSLv3) for testing purposes. However, adding options to the stunnel.conf file doesn't seem to return new ciphers during the negotiation (using sslscan to generate the report). I have look through the documentation and it doesn't seem to address these options very well. Thanks, glenn options = SSLv2 ;;ciphers = DH+AES ;;ciphers = HIGH:LOW ;;ciphers = HIGH:MEDIUM ciphers = ALL Supported Server Cipher(s): Accepted TLSv1 256 bits DHE-RSA-AES256-SHA Accepted TLSv1 256 bits AES256-SHA Accepted TLSv1 128 bits DHE-RSA-AES128-SHA Accepted TLSv1 128 bits AES128-SHA Accepted TLSv1 168 bits EDH-RSA-DES-CBC3-SHA Accepted TLSv1 56 bits EDH-RSA-DES-CBC-SHA Accepted TLSv1 168 bits DES-CBC3-SHA Accepted TLSv1 56 bits DES-CBC-SHA Accepted TLSv1 128 bits IDEA-CBC-SHA Accepted TLSv1 128 bits RC4-SHA Accepted TLSv1 128 bits RC4-MD5 Prefered Server Cipher(s): TLSv1 256 bits DHE-RSA-AES256-SHA ________________________________ This message may contain confidential information. If you are not the intended recipient of this e-mail, do not disseminate, distribute or copy this e-mail and delete this e-mail from your system.

2 1

capi, other engines not found at runtime
by Derek Cole 14 Nov '14

14 Nov '14

Hello, I am trying to compile stunnel on windows instead of using the pre-built binaries. When I run stunnel.exe, and have engine=capi in my stunnel.conf file, i get the following [ ] Enabling support for engine 'capi' [!] error queue: 2606A074: error:2606A074:engine routines:ENGINE_by_id:no such engine [!] error queue: 260B6084: error:260B6084:engine routines:DYNAMIC_LOAD:dso not found [!] error queue: 25070067: error:25070067:DSO support routines:DSO_load:could not load the shared library [!] ENGINE_by_id: 25078067: error:25078067:DSO support routines:WIN32_LOAD:could not load the shared library [!] Line 17: "engine = capi": Failed to open the engine Is this something wrong at link time in my compile? I used a precompiled version of OpenSSL, and modified this: SSLDIR=C:\OpenSSL-Win32 INCDIR=$(SSLDIR)\include LIBDIR=$(SSLDIR)\lib I thought that was all that would be needed, but apparently not. I then tried to go to make this modification: SSLLIBS=/LIBPATH:"$(LIBDIR)" libeay32.lib ssleay32.lib capi.lib thinking that maybe I need to explicitly add capi in, and again it compiles, but does not run. I have also tried to move the capi.dll from the LIBDIR into the same folder as the stunnel executable to make sure it was found, and I still have had no luck. Any ideas?

1 0

Building stunnel in Visual Studio
by Derek Cole 13 Nov '14

13 Nov '14

Hello, I am interested in tweaking something with stunnel for windows. I was trying to find if there were instructions for building the software on windows using Visual Studio. I found a deprecated FAQ that said that it was possible to compile with Visual C++. Can anyone give me any pointers on how to get up and going? http://www.onsight.com/faq/stunnel/stunnel-faq-3.html Thanks

2 1

Re: [stunnel-users] Certificate
by Vitic Zikica (EXT) 12 Nov '14

12 Nov '14

HI, We are using stunnel to connect to some servers. The client informed us that we have to use new 2048 bit certificate ( XXXXX.crt ) Is it supported by stunnel ? how can I install it ? Thank you . Zikica VITIC BFI-DSI-FIS-ETRADING-ARCHITECTURE 47, quai d'Austerlitz 75648 Paris Cedex 13 Phone: +(33) 1 58 55 31 84 E-mail: flux(a)natixis.com<mailto:flux@natixis.com> L'integrite de ce message n'etant pas assuree sur internet, Natixis ne peut etre tenu responsable de son contenu. Toute utilisation ou diffusion non autorisee est interdite. Si vous n'etes pas destinataire de ce message, merci de le detruire et d'avertir l'expediteur. Ensemble, faisons un geste pour l'environnement : n'imprimons nos mails que si necessaire. The integrity of this message cannot be guaranteed on the Internet. Natixis can not therefore be considered responsible for the contents. Any unauthorized use or dissemination is prohibited. If you are not the intended recipient of this message, then please delete it and notify the sender. Let us mind the environment : let's print our mails only when necessary

1 0

Output to neither stdout nor stderr it seems
by Casper Thomsen 10 Nov '14

10 Nov '14

Hi stunnel-users I run stunnel4 in docker with the following config file: --- /etc/stunnel/stunnel.conf -------------- sslVersion = SSLv3 pid = /var/lib/stunnel4/stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 2 CApath = /etc/ssl/certs debug = notice output = /var/log/stunnel.log client = yes foreground = yes [foo] accept = 1234 connect = 127.0.0.1:2345 TIMEOUTclose = 3 --------------------------------------------------------- When I run stunnel and pipe stdout and stderr to /dev/null, I still get output: root@849b7eb3bbd0:/# /usr/bin/stunnel4 /etc/stunnel/stunnel.conf 2>/dev/null >/dev/null stunnel: LOG5[258:140421949949696]: stunnel 4.53 on x86_64-pc-linux-gnu platform stunnel: LOG5[258:140421949949696]: Compiled/running with OpenSSL 1.0.1e 11 Feb 2013 stunnel: LOG5[258:140421949949696]: Threading:PTHREAD SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6 stunnel: LOG5[258:140421949949696]: Reading configuration from file /etc/stunnel/stunnel.conf stunnel: LOG5[258:140421949949696]: Configuration successful ^Cstunnel: LOG3[258:140421949949696]: Received signal 2; terminating Complete shell output is attached. Any hints on what's happening? Kindly, -- Casper Thomsen

3 4

Truncated responses with stunnel >= 5.05
by Tuomas Silen 07 Nov '14

07 Nov '14

Hi there, After upgrading to stunnel 5.07 I've seen a lot of truncated http responses. I've tested different versions and 5.04 is the last one to work fine. There seems to be fixes to a similar issue in 5.05, but at least for me the result seems to be the opposite. I'm on Ubuntu 12.04. Looking at the logs, the log entries are identical except for one part, the amount of data sent to SSL: stunnel >= 5.05, not working: LOG3[31153]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing LOG5[31153]: Connection closed: 67584 byte(s) sent to SSL, 184 byte(s) sent to socket stunnel 5.04, works: LOG3[6248]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing LOG5[6248]: Connection closed: 113051 byte(s) sent to SSL, 184 byte(s) sent to socket It's worth noting that in both cases the closing happens after TIMEOUTclose has exceeded (probably because of a missing close notify?). In any case, apparently less data is sent to SSL and that's how it seems like; the end of the http responses get truncated. If everything's very fast (e.g. localhost connections only) the problem seems not to happen, not very often at least. With connections between two servers I've been able to reproduce it pretty much every time in my setup (stunnel -> haproxy -> apache -> unicorn). Undefining the POLLRDHUP or reverting the changes in 5.05 to src/client.c seem to fix the problem for me. Any ideas what would be a proper fix? Thanks! Best regards, Tuomas Silen

3 5

[BUG] SSL directory scan breaks cross-compilation
by John Spencer 05 Nov '14

05 Nov '14

it seems between 5.02 and 5.06 a "SSL directory scan" was introduced. for main_dir in /usr/local /usr/lib /usr/pkg /opt/local /opt /usr; do for sub_dir in /ssl /openssl /; do check_ssl_dir "$main_dir$sub_dir" && break 2 this ofc breaks cross-compilation. the concept of searching for a library directory is completely broken. if just adding -lssl -lcrypto to LDFLAGS doesnt find the openssl libraries at link time, the user's compiler toolchain is wrongly set up, and its not the job of a package to work around that by searching through a number of directories. it's the user's job to fix his toolchain by supplying the right -L paths in case he's got his library installed in a non-standard location. also, there's pkg-config (which supports crosscompilation via a PKG_CONFIG_SYSROOT_DIR env var) in case a library needs elaborate CFLAGS. --JS

2 6

slight fix for tools/stunnel.conf-sample.in
by Gleydson Soares 03 Nov '14

03 Nov '14

----- Forwarded message from Gleydson Soares <gsoares(a)gmail.com> ----- Date: Mon, 3 Nov 2014 17:00:38 -0300 From: Gleydson Soares <gsoares(a)gmail.com> To: stunnel-users(a)stunnel.org Cc: Marzena.Trojnara(a)mirt.net Subject: slight fix for tools/stunnel.conf-sample.in User-Agent: Mutt/1.5.23 (2014-03-12) Hi, I noticed unexpected characters in stunnel.conf-sample.in, stunnel 5.07. following diff fix that. --, Gleydson. ----- End forwarded message -----

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users